UNI-T UT805 Specifications download pdf (Page 7)

Model UT805: OPERATING MANUAL

Safety Information

This Meter complies with the standards IEC61010: in

pollution degree 2, overvoltage category (CAT. I 1000V,

CAT II 600V) and double insulation.

CAT. III: Distribution level, fixed installation, with smaller

transient overvoltage than CAT. IV.

CAT IV: Primary supply level, overhead lines, cable

systems etc.

Use the Meter only as specified in this operating manual,

otherwise the protection provided by the Meter may be

impaired.

In this manual, a Warning identifies conditions and

actions that pose hazards to the user, or may damage

the Meter or the equipment under test.

A Note identifies the information that user should pay

attention on.

International electrical symbols used on the Meter and

in this Operating Manual are explained on page 7.

Rules For Safe Operation

Warning

To avoid possible electric shock or personal injury,

and to avoid possible damage to the Meter or to the

equipment under test, adhere to the following rules:

Before using the Meter inspect the case. Do not use

the Meter if it is damaged or the case (or part of the

case) is removed. Look for cracks or missing plastic.

Pay attention to the insulation around the connectors.

Inspect the test leads and power cord for damaged

insulation or exposed metal. Check the test leads

for continuity. Replace damaged test leads and power

cord with identical model number or electrical

specifications before using the Meter.

Inspect the VFD display for no display..

Do not apply more than the rated voltage, as marked

on the Meter, between the terminals or between any

terminal and grounding.

1 2 3 4 5 6 7 8 9 10 11 12 ... 63 64

No comments

UNI-T UT805 Specifications Page 7