<Toc> <2. Initial Settings>
2-13
IM 05D01D12-41E 6th Edition: Mar. 25, 2005-00
2.6 Setting the PV Display Color Changing Function
“Active Color PV Display”
The following operating procedure describes an example of changing the PV color mode
(factory-set default : Fixed in red mode) to Link to alarm 1 mode.
(1)
(2)
(6)
Press the key for more than 3 seconds to
call up the menu “OP.PA.”
Press the key several times to display the
menu “PCMD” (PV color mode).
Bring the operating display into view (appears at
power on).
(3)
(7)
(4)
Press the key once to display the parameter
“PWD.”
(8)
Press the key once to register the setpoint.
Press the key once to display the menu “STUP.”
Press the key or key to display the
required setpoint. The figure below shows an
example of setting Link to alarm 1 mode.
(5)
Press the key once to display the menu
“FUNC.”
If PCMD = 6, 7, 8 or 9,
also set the relating
paraemters PCCH
(High limit for PV color
change) and PCCL
(Low limit for PC color
change).
(9)
Press the key for more than 3 seconds.
This returns you to the display shown at power-on
(figure blow).
SET/ENT
SET/ENT
SET/ENT
SET/ENT
PV
MAN
A/M
SP
AL123
SP
234
SET/ENT
PV
MAN
A/M
SP
AL123
SP
234
SET/ENT
PV
MAN
A/M
SP
AL123
SP
234
SET/ENT
PV
MAN
A/M
SP
AL123
SP
234
SET/ENT
PV
MAN
A/M
SP
AL123
SP
234
SET/ENT
PV
MAN
A/M
SP
AL123
SP
234
SET/ENT
PV
MAN
A/M
SP
AL123
SP
234
SET/ENT
PV
MAN
A/M
SP
AL123
SP
234
SET/ENT
SET/ENT
PV
MAN
A/M
SP
AL123
SP
234
SET/ENT
SET/ENT
Displays PV.
Displays
target setpoint
Displays
menu “OP.PA”
Displays
menu “STUP”
Displays
menu “FUNC”
Displays
parameter “PCMD”
Blinks
during change
Displays PV.
Displays
target setpoint.
Comments to this Manuals