UNI-T UT33A Specifications download pdf (Page 38)

Model UT33A: OPERATING MANUAL

C. Replacing the Fuses (see figure 8)

Warning

To avoid electrical shock or arc blast, or personal injury or damage to the Meter,

use specified fuses ONLY in accordance with the following procedure.

To replace the Meter’s fuse:

1. Disconnect the connection between the testing leads and the circuit under test,

and remove the testing leads away from the input terminals of the Meter.

2. Turn the Meter to OFF position.

3. Remove the screws from case bottom, and separate the case bottom from the

case top.

Maintenance(4)

4. Remove the battery from the battery compartment.

5. Replace the battery with a new 1.5V AAA battery.

6. Rejoin the case bottom and case top, and reinstall

the screw.

1 2 ... 33 34 35 36 37 38 39 40 41 42

No comments

UNI-T UT33A Specifications Page 38